Title page for etd-0907111-163412


[Back to Results | New Search]

URN etd-0907111-163412
Author Teng-yen Tang
Author's Email Address m993100008@student.nsysu.edu.tw
Statistics This thesis had been viewed 5350 times. Download 0 times.
Department Materials and Optoelectronic Science
Year 2011
Semester 1
Degree Master
Type of Document
Language zh-TW.Big5 Chinese
Title Mechanical Properties of electrodeposited Ni and Ni-Co alloys having bimodal distribution of grain size
Date of Defense 2011-08-16
Page Count 127
Keyword
  • ductility
  • mechanical properties
  • bimodal grain size distribution
  • Ni-Co alloy
  • electrodeposition
  • Abstract The strength of polycrystalline materials increases with decreasing grain size. The increase of strength is usually associated with deterioration of ductility, especially for materials having sub-micrometer or nanometer in grain size. It has bee suggested that the ductility of submicro- or nano- grained materials can be improved significantly by introducing a bimodal distribution of grain sizes. The purpose of the present study aims at clarifying the microstructural parameters of the bimodal distribution, such as area ratio and size difference, on the strength and ductility of pure nickel and nickel-cobalt specimens produced by electrodeposition. The microstructural parameters were determined from orientation imaging mapping technique using electron backscatter diffraction. Results indicated that the yield strength is mainly determined by the average size of the fine grains, whereas the tensile strength has a good relation with the average grain size in total. Moreover, it was showed that samples having a area ratio of the fine grains lower than 30% or higher than 70% possess a better ductility. The possible mechanism is discussed in detail.
    Advisory Committee
  • Pa-wei Kao - chair
  • Chin-pu Chang - co-chair
  • Liu-wen Chang - advisor
  • Files
  • etd-0907111-163412.pdf
  • Indicate in-campus at 99 year and off-campus access at 99 year.
    Date of Submission 2011-09-07

    [Back to Results | New Search]


    Browse | Search All Available ETDs

    If you have more questions or technical problems, please contact eThesys