Title page for etd-0813112-170622


[Back to Results | New Search]

URN etd-0813112-170622
Author Yi-Xing Zhuang
Author's Email Address No Public.
Statistics This thesis had been viewed 5569 times. Download 461 times.
Department Electro-Optical Engineering
Year 2011
Semester 2
Degree Master
Type of Document
Language zh-TW.Big5 Chinese
Title Effect of deposition rate of host material N,N’-dicarbazolyl-3,5-benzene(mCP) in phosphorescent organic light-emitting diodes
Date of Defense 2012-07-05
Page Count 118
Keyword
  • Phosphorescence
  • mCP
  • Deposition rate
  • Aggregation
  • Abstract Phosphorescent organic light-emitting diodes (PhOLED) have attracted a lot of attention in these years.Blue PhOLED is especially important because of short lifetime and low optoelectronic performance as comparing to red and green PhOLEDs.Researches have shown that performance of OLED devices is highly rely on the deposition rate of organic materials ,which attest the morphology of organic layers.
    To study how the deposition rate of host material on the performance of blue PhOLED,mCP is chosen a host material for a blue dopant - FIrpic and deposition rate of mCP on the performance of blue PhOLED performance is studied.
    It was found that UV-Vis spectrum of mCP varied with different deposition rate.Additionally,an PL emission peak (400nm~500nm) appeared on the thermal evaporated mCP,which was possibly originated from the aggregation of mCP.Surface roughness of the evaporated mCP film became smaller as the deposition rate increased.A high performance (8.52 lm/W@1.2mA/cm2) is fabricated at a deposition rate at 3 A/s.
    Advisory Committee
  • Chih-Chien Lee - chair
  • Shun-Wei Liu - co-chair
  • Ray-Chung Chang - co-chair
  • Ping-Tsung Huang - co-chair
  • Mei-Ying Chang - advisor
  • Files
  • etd-0813112-170622.pdf
  • Indicate in-campus at 5 year and off-campus access at 5 year.
    Date of Submission 2012-08-13

    [Back to Results | New Search]


    Browse | Search All Available ETDs

    If you have more questions or technical problems, please contact eThesys