Title page for etd-0724116-124922


[Back to Results | New Search]

URN etd-0724116-124922
Author I-cheng Hung
Author's Email Address No Public.
Statistics This thesis had been viewed 5358 times. Download 0 times.
Department Materials and Optoelectronic Science
Year 2015
Semester 2
Degree Master
Type of Document
Language zh-TW.Big5 Chinese
Title The effect of annealing temperature and time on microstructure and tensile properties of a carbide-contained medium Mn steel
Date of Defense 2016-07-27
Page Count 150
Keyword
  • Annealing temperature
  • Annealing time
  • Tensile properties
  • AHSS
  • Cold rolling
  • Abstract This study explores the effect of annealing temperature, time and amount of cold rolling on the microstructure and tensile properties of a medium manganese steel after two-stage annealing and cold rolling procedures. After the first stage annealing, the microstructure consists of ferrite and tiny carbides. During the second stage annealing, the carbides are dissolved and provide abundant manganese and carbon to the surrounding ferrite matrix, which then transforms into submicron austenite grains. The small grain size of the austenite increases the austenite stability, and let TRIP effect occurs during deformation.Diffirent cold roll reduction gave similar phase fraction, composition, grain size and aspect ratio, but 25% and 50% cold rolling followed by 750℃ annealing 1 hour gave diffirent tensile properties. Annealing temperature and time affect austenite fraction, alloy partition and grain size, which in turn affect the tensile properties of the steel. To make enough carbides to be dissolved, the annealing temperature should be higher than 700℃, and the annealing time should exceed 5 minutes.
    Advisory Committee
  • Liu-wen Chang - chair
  • Jui-Fan Tu - co-chair
  • Chih-Pu Chang - advisor
  • Files
  • etd-0724116-124922.pdf
  • Indicate in-campus at 99 year and off-campus access at 99 year.
    Date of Submission 2016-08-24

    [Back to Results | New Search]


    Browse | Search All Available ETDs

    If you have more questions or technical problems, please contact eThesys