博碩士論文 etd-0301104-161454 詳細資訊


[回到前頁查詢結果 | 重新搜尋]

姓名 林宜青(I-Ching Lin) 電子郵件信箱 roseil@sinamail.com
畢業系所 企業管理學系研究所(Business Management)
畢業學位 碩士(Master) 畢業時期 92學年第1學期
論文名稱(中) 精實或敏捷?供應鏈策略之選擇
論文名稱(英) To be Lean or to be Agile? The Choice of Supply Chain Strategy
檔案
  • etd-0301104-161454.pdf
  • 本電子全文僅授權使用者為學術研究之目的,進行個人非營利性質之檢索、閱讀、列印。
    請遵守中華民國著作權法之相關規定,切勿任意重製、散佈、改作、轉貼、播送,以免觸法。
    論文使用權限

    電子論文:校內校外完全公開

    論文語文/頁數 英文/72
    統計 本論文已被瀏覽 5565 次,被下載 6044 次
    摘要(中) none
    摘要(英) The changing role of manufacturing has ushered in an increasing number of initiatives aimed at improving operations. Specifically, various themes in operations have evolved over time, from forecasting and planning in the 1950s and 1960s through productivity and quality in the 1970s and 1980s respectively, to adaptability and responsiveness in the 1990s.
    Even though the emergence of agile paradigm had spurred a large stream of research by scholars, yet most of the research had been at the manufacturing level. Very few researches have gone beyond the manufacturing level to the larger supply chain level. And there are even fewer researches discussing about the combination of lean thinking and agile thinking in supply chain level. Based on the above statement, the purpose of this study is as follows:
    1. To identify the definition and characteristics of “Lean” and “Agile”.
    2. To explore the relationship of the two kinds of thinking.
    3. To prove the practicability of the findings.
    This research is organized as follows. Chapter 2 clearly describes the origin, definition and characteristics of lean thinking and agile thinking, and comparison of the two kind of thinking. Chapter 3 introduces the major combination factors of these- material decoupling point, information decoupling point, and postponement. Followed by introduction of three practical ways to combine the lean thinking and agile thinking.
    關鍵字(中)
  • 精實思考
  • 敏捷思考
  • 供應鏈管理
  • 關鍵字(英)
  • lean thinking
  • agile thinking
  • supply chain strategy
  • 論文目次 Table of Contents
    Chapter 1 Introduction…………………………………………………………1
    1.1 Background……………………………………………………………1
    1.2 Motives and objectives of this research………………………………4
    1.3 Organization of this research…………………………………………4
    Chapter 2 Literature Review……………………………………………………6
    2.1 Lean thinking…………………………………………………………6
    2.1.1 Origins of lean thinking……………………………………6
    2.1.2 Definitions of lean thinking…………………………………7
    2.1.3 Important principles of lean thinking……………………10
    2.2 Agile thinking………………………………………………………12
    2.2.1 Origins of agile thinking…………………………………12
    2.2.2 Definitions of agile thinking………………………………13
    2.2.3 Agility versus flexibility…………………………………14
    2.2.4 Characteristics of the agile supply chain…………………16
    2.3 Comparison of the two kinds of thinking……………………………21
    Chapter 3 Combining Lean Thinking and Agile Thinking…………………26
    3.1 Major factors…………………………………………………………26
    3.1.1 Material decoupling point…………………………………27
    3.1.2 Information decoupling point……………………………31
    3.1.3 Postponement……………………………………………..33
    3.2 Practical ways to combine the lean think and agile thinking………35
    3.2.1 The Pareto curve approach………………………………...35
    3.2.2 The decoupling point approach……………………………36
    3.2.3 The surge/base demand separation approach……………38
    3.3 An integrated approach to supply chain design- the Agile Enterprise Enabling Model………………………………………………………40
    Chapter 4 The Research Findings……………………………………………43
    4.1 Introduction of CTO into company A………………………………43
    4.1.1 Environment of PC industry……………………………...43
    4.1.2 Company profile………….………………………………44
    4.1.3 Definition of CTO………………………………………..45
    4.2 Key factors while introducing CTO into company A ………………46
    4.2.1 EDI-ENT/ WEB-EDI……………………………………..47
    4.2.2 Modular BOM (bill of materials)…………………………49
    4.3 Findings and discussions from case studying……………………….51
    4.3.1 Comparison between BTO and CTO production………….51
    4.3.2 Leanness or agility of company A’s supply chain…………52
    Chapter 5 Conclusions…………………………………………………………61
    5.1 Findings and conclusions……………………………………………61
    5.1.1 Five key principles driving lean thinking…………………61
    5.1.2 Four distinguishing characteristics of agile supply chain…61
    5.1.3 Two characteristics of different importance………………61
    5.1.4 Three major factors about combining the two thinking…62
    5.1.5 Three ways to combine the lean think and agile thinking…62
    5.1.6 Findings from the case studying…………………………62
    5.2 Suggestions…………………………………………………………62
    參考文獻 Reference
    《Website》
    http://taiwan.fic.com.tw/
    http://tailink.hp.com.tw/taiweb/cmain/news/news.asp
    http://www.digitimes.com.tw/
    http://www.compaq.com.tw/
    《Chinese》
    張勇毅 (2002),CTO生產模式之研究—以我國筆記型電腦為例,國立政治大學商學院經營管理碩士學程碩士論文。
    《English》
    1. Books
    Christopher, M. (1998), Logistics & Supply Chain Management, 2nd Edition (London, Pitmans).
    Forrester, J. (1961), Industrial Dynamics (Cambridge M.A., MIT).
    Gattorna, J.L. and Walters, D.W. (1996), Managing the Supply Chain - A Strategic Perspective (London, Macmillan).
    Goldman S.L., Nagel R.N. and Preiss (1995), Agile Competitors and Virtual Organizations: Strategies for Enriching the Customer (Van Nostrand, Reinhold).
    Hoekstra, S. and Romme J. (1992), Integrated Logistics Structures: Developing Customer Oriented Goods Flow (London, McGraw-Hill).
    Kidd, P.T. (1994), Agile Manufacturing: Forging New Frontiers, Addison-Wesley, Reading (MA, Wokingham).
    Koch, R. (1997), The 80/20 Principle: the Secret of Achieving More with Less (London, Nicholas Brealey).
    Lamming, R.C. (1993), Beyond Partnership (Hemel Hempstead, Prentice-Hall).
    Meredith, J. (1992), The Management of Operations. A conceptual emphasis, 4th ed (New York, Wiley).
    Morehouse, J.E. and Bowersox, D.J. (1995), Supply Chain Management: Logistics for the Future (Washington, D.C., Food Marketing Institute).
    Ohno, T. (1988), Toyota Production System: Beyond Large-Scale Production (Cambridge, Mass Productivity).
    van Hoek, R. (1998), Postponed Manufacturing in European Supply Chains (Utrecht, KNAG).
    Victor, B. and Boynton, A.C. (1998), Invented Here: A Practical Guide to Transforming Work, Harvard Business School (MA, Cambridge).
    Womack, J.P., Jones, D.T. and Roos, D. (1990), The Machine That Changed the World (New York, Rawson Associates).
    2. Articles
    Aitken, J. (2000) “Agility and leanness- a successful and complimentary partnership in the lighting industry”, Proceeding of the LRN 2000 Conference, University of Cardiff, Wales, pp. 1-7.
    Andraski, J. (1994), “Foundations for Successful Continuous Replenishment Programs”, The International Journal of Logistics Management, 5 (1), pp. 1-8.
    Backhouse, C.J. and Burns N.D. (1999), “Agile value chains for manufacturing - implications for performance measures”, International Journal of Agile Management Systems, 1 (2), pp. 76-82.
    Billington, C. and Amaral, J. (1999), “Investing in product design to maximize profitability through postponement” in Andersen, David (ed), Achieving Supply Chain Excellence Through Technology (San Francisco, Montgomery Research).
    Bucklin, L.P. (1965), “Postponement, speculation and the structure of distribution channels”, Journal of Marketing Research, 2 (Feb), pp. 26-31.
    Burgess, T.F. (1994), “Making the leap to agility”, International Journal of Operation and Production Management, 14 (11), pp. 23-34.
    Childerhouse, P., Disney, S. and Towill, D.R. (2000), “Speeding up the progress curve towards effective supply chain management”, International Journal of Supply Chain Management, 5 (3), pp. 176-186.
    Christopher, M. (2000), “The agile supply chain: competing in volatile markets”, Industrial Marketing Management, 29 (1), pp. 37-44.
    Christopher, M. and Towill, D.R. (2000), “Supply chain migration from lean and functional to agile and customized”, International Journal of Supply Chain Management, 5 (4), pp. 206-13.
    Christopher, M. and Towill, D.R. (2001), “An integrated model for the design of agile enterprise”, International Journal of Physical Distribution and Logistics Management, 31 (4), pp. 235-246.
    Davies, T. (1993), “Effective supply chain management”, Sloan Management Review, Summer, pp. 35-45.
    Feitzinger, E. and Lee, H.L. (1997), “Mass customization at Hewlett-Packard: the power of postponement”, Harvard Business Review, 75 (Jan/Feb), pp. 116-21.
    Fisher, M. (1997), “What is the right supply chain for your product?” Harvard Business Review, Mar/Apr, pp. 105-116.
    Gavirneni, S. and Tayur, S. (1997), “Delayed product differentiation versus information sharing”, Graduate School of Industrial Administration Working Paper, Aug, Carnegie Mellon University.
    Gould, P. (1997), “What is agility?” Manufacturing Engineer, Feb, pp. 28-31.
    Harrison, A., Christopher, M. and van Hoek, R. (1999), “Creating the agile supply chain”, School of Management Working Paper, Cranfield University (Cranfield).
    Iacocca Institute (1991), “21st Century Manufacturing Enterprise Strategy”, An Industry-Led View, 1 and 2, Iacocca Institute (PA, Bethlehem).
    Jones, D.T., Hines, P. and Rich, N. (1997), “Lean logistics”, International Journal of Physical Distribution & Logistics Management, 27 (3/4), pp. 1-14.
    Krafcik, J. F. (1988), “Triumph of the lean production systems”, Sloan Management Review, 30 (1), pp. 41-52.
    Lamming, R.C. (1996), “Squaring lean supply with supply chain management”, International Journal of Operations & Production Management, 16 (2), pp. 183-96.
    Lee, H., Padmatnabhan P. and Whang, S. (1997), “The paralyzing curse of the bullwhip effect in a supply chain”, Sloan Management Review, Spring.
    Magretta, J. (1998), “The power of virtual integration: an interview with Dell Computer's Michael Dell”, Harvard Business Review, 76 (Mar/Apr), pp. 72-84.
    Mason-Jones, R. and Towill, D.R. (1998), “Time compression in the supply chain: Information management is the vital ingredient”, Logistics Information Management, 11 (2/3), pp. 93-105.
    Mason-Jones, R. and Towill, D.R. (1999), “Using the information decoupling point to improve supply chain performance”, International Journal of Logistics Management, 10 (2), pp. 13-26.
    Mason-Jones, R., Naylor, B. and Towill, D.R. (2000), “Engineering the leagile supply chain”, International Journal of Agile Management Systems, 2 (1), pp. 54-61.
    McCullen, P. and Towill, D.R. (2001), “Achieving lean supply through agile manufacturing”, International Journal of Manufacturing Technology and Management, 12 (7), pp. 524-533.
    McGaughey, R.E. (1999), “Internet technology: contributing to agility in the twenty-first century”, International Journal of Agile Management Systems, 1 (1), pp. 7-13.
    Naylor, J,B., Naim, M.M. and Berry, D. (1999), “Leagility: Integrating the lean and agile manufacturing paradigms in the total supply chain”, International Journal of Production Economics, 62, pp. 107-118.
    Pagh, J.D. and Cooper, M.L. (1998), “Supply chain postponement and speculation strategy: how to choose the right strategy”, Journal of Business Logistics, 19 (2), pp. 13-33.
    Prater, E., Biehl, M. and Smith, M.A. (2001), “International supply chain agility: Tradeoffs between flexibility and Uncertainty”, International Journal of Operations & Production Management, 21 (5/6), pp.823-839.
    Robertson, M. and Jones, C. (1999), “Application of lean production and agile manufacturing concepts in a telecommunications environment”, International Journal of Agile Manufacturing Systems, 1 (1).
    Sohal, A.S. (1999), “Developing agile manufacturing in Australia”, International Journal of Agile Management Systems, 1 (1), pp. 60-63.
    Sohal, A.S. and Egglestone, A. (1994), “Lean production: Experience among Australian organizations”, International Journal of Operations and Production Management, 14 (11), pp.35-51.
    Tan, B. (1998), “Agile manufacturing and management of variability”, International Transactions in Operational Research, 5 (5), pp. 375-388.
    Towill, D.R. (1997), “Successful business systems engineering”, IEE Management Journal, 7, Pt I (1), pp55-64, Pt II (2), pp.89-96.
    Upton, D.M. (1995), “What really makes factories flexible?”, Harvard Business Review, July/Aug, pp.74-86.
    van Hoek, R. (1998), “Reconfiguring the supply chain to implement postponed manufacturing”, International journal of Logistics Management, 9 (1).
    van Hoek, R. and Harrison, A. (2001), “Guest editorial”, International Journal of Physical Distribution and Logistics Management, 31 (4), pp.231-234.
    Vastag, G., Kasarda, J.D. and Boone, T. (1994), “Logistical support for manufacturing agility in global markets”, International Journal of Operations & Production Management, 14 (11), pp. 73-85.
    Vokurka, R.J. and Fliedner G. (1998), “The journey toward agility”, Industrial Management & Data Systems, 98 (4), pp.165-171.
    Wadhwa, S. and Rao, K.S. (2000), “Flexibility: an emerging meta-competence for managing high technology”, International Journal of Technology Management, 19 (7/8), pp.820-845
    Werr, A., Stjernberg, T. and Docherty, P. (1997), “The functions of methods of change in management consultancy”, Journal of Organizational Management Change, 10 (4), pp. 288-307.
    Willis, T.H. (1998), “Operational competitive requirements for the twenty-first century”, Industry Management and Data Systems, 98 (2), 83-86.
    Young, S. (1992), “A framework for successful adoption and performance of Japanese manufacturing practices in the USA”, Academy of Management Review, 17(14), pp. 677-700.
    Yusuf, Y.Y., Sarhadi, M. and Gunasekaran, A. (1999), “Agile manufacturing: The drivers, concepts and attributes”, International Journal of Production Economics, 62, pp. 33-43.
    Zhang, J., Gu, J., Peigen L. and Duan, Z. (1999), “Object-oriented modeling of control system for agile manufacturing cells”, International Journal of Production Economics, 62, pp.145 –153.
    Zuccaro, B. (1998), “Keynote Address”, EUROMA Conference on Managing Operations Networks (Venice).
    口試委員
  • 盧淵源 - 召集委員
  • 秦長強 - 委員
  • 梁慧玫 - 指導教授
  • 口試日期 2004-01-15 繳交日期 2004-03-01

    [回到前頁查詢結果 | 重新搜尋]


    如有任何問題請與論文審查小組聯繫